SET-2110 Fault Insertion Unit Card

SET-2110 – Fault Insertion Unit Card

The SET-2110 Fault Insertion Unit Card is a large-scale, high density switching matrix.

Each line of the 32 single-ended or 16 differential channels can be connected individually and flexibly to the high current fault injection bus. For this, one of the both fault bus signal pairs can be selected dynamically for every channel. The SET-2110 Fault Insertion Card also provides the ability to generate short circuits between a channels positive and negative signal.

Unlike traditional routing matrix cards, the SET-2110 is designed specifically for the challenges of signal routing in HiL systems. To maximize customizability, the SET-2110 features two plug-in module slots that can provide additional features, such as instrument connect.

Spezifikationen

Absolute Maximum Ratings

	Condition	Value
Max. Input Voltage	Any Pin	60 Vdc
Min. Input Voltage	Any Pin	-60 Vdc
Max. Switching Power	DC, Resistive load	60 W
Max. Current Rating		1.5 A

Technical Data

	Condition	Value	Comment
Update Time		10 ms	SLSC Commit CMD duration
Max Initial Contact Resistance	J1 → XJ2, J2 → XJ2, J1 → J2	500 mΩ
Expected Electrical Lifetime	1 A, 30 Vdc resistive	10⁵ operations
Expected Electrical Lifetime	1,5 A, 30 Vdc resistive	10⁴ operations
Bandwith	-3 dB, 50 Ω Termination	≤ 20 MHz

Physicals Characteristics

	Condition	Value	Comment
Module Dimensions	Excluding ejector	144.32mm x 30.48mm x 302mm (H x W x D)	Standard SLSC card size
Front Panel Connector		2x female DB -44 high-density D-Sub with 4-40 UNC screw lock	For mating connectors and cables, see below
RTI Connector		2mm hard metric per IEC 61076-101	Any RTI marked

Environmental

	Condition	Value
Operating Humidity	Relative, non-condensing	10% – 90%
Storage Humidity	Relative, non-condensing	5% – 95%
Operating Temperature	Forced-air cooling from chassis	0 °C – 40 °C
Storage Temperature		-40 °C – 85 °C
Maximum Altitude		2000 m

SET-2110

Fault Insertion Unit Card