SET-1623 ARINC 429 Karte

SET 1623 – ARINC 429 Card

The SET-1623 ARINC 429 card is designed for the ARINC 429 data standard bus.

The SET 1623 ARINC Card has 32 Tx/Rx Channels. These 32 Tx/Rx channels are structured in 4 banks (P0.x to P3.x) 8 channels each. Each bank is controlled by a dedicated SPI (SPI0 to SPI3) located on RTI.

The direction is selectable by software for each channel. Individual transfer rate switchover for each Tx channel and automatic transfer rate recognition on Rx channels. Message reception and itemization by label in hardware and additional direct access to the transmitter and receiver unit.

Spezifikationen

Absolute Maximum Ratings

	Condition	Value	Comment
Channel Short Circuit	cont.	80 mA	When in Tx mode
Any Pin to ARINC Reference		±7 V
Any Pin to Chassis GND		max 60 V

Technical Data

	Condition	Value	Comment
Number Channels		32
Direction		Rx/Tx	Software-selectable for each channel
Bit Rate Tx		100 kb/s / 12.5 kb/s	Software-selectable for each channel
Bit Rate Rx		100 kb/s ± 1% 12.0 kb/s to 14.5 kb/s ± 1%	Auto-detected for each channel
Scheduling Slots	per channel	256 slots	Label used as index per default
Indexing Slots	per channel	256 slots	Label used as index per default

Physical Characteristics

	Condition	Value	Comment
Module Dimensions	Excluding ejector	144.32 mm x 30. 48 mm x 302 mm (H x W x D)	Standard SLSC card size
Front Panel Connector		2x female DB -44 high-density D-Sub with 4-40 UNC screw lock
RTI Connector		2mm hard metric per IEC 61076-101	Any RTI marked

Environmental

	Condition	Value
Operating humidity	Relative, non-condensing	10% – 90%
Storage humidity	Relative, non-condensing	5% – 95%
Operating temperature	Forced-air cooling from chassis	0 °C – 40 °C
Storage temperature		-40 °C – 85 °C
Maximum altitude		2000 m

SET-1623

ARINC 429 Card