SMARTbrick 3500A

With the SMARTbrick 3500A, a PT100/PT1000 type temperature sensor is electronically emulated as ohmic resistance via an analog-digital control circuit. The single-channel resistor emulation emulates an electrical “two-pole network” and is galvanically isolated from the remaining test system. A line break / short-circuit can be stimulated individually for each channel for error stimulations. The resistance value, sensor type and the error stimulation are specified in connection with the carrier board via CAN bus.

Spezifikationen

Channels	1
Input voltage	max. +10 V (not protected against polarity reversal)
Min measurement current	100 µA
Simulation range Pt100	90 Ω – 200 Ω
Setting accuracy Pt100	< 0.3 Ω
Simulation range Pt1000	900 Ω – 4000 Ω
Setting accuracy Pt1000	900 – 2000 Ω: < 2 Ω 2000 – 3500 Ω: < 6 Ω 3500 – 4000 Ω: < 8 Ω
Accuracy of the st value	< 1%
Insulation voltage	max. 50 VDC
Insulation resistance	> 1 MΩ
Internal resistance in short circuit	max. 3.5 Ω
Maximum current during error simulation short circuit	10 mA

Modulfunctions

Selection PT100/PT1000

via software

Setting the resistance value

Error stimulation „line breagage“	via software
Error stimulation „short circuit“	via software
Display of error stimulies	via LEDs

PT100 / PT1000 EMULATOR