A single-channel current measuring module with galvanic isolation is used to analyse power outputs. A load resistance of 75 Ohm is used for current analysis. A line break and a short circuit can be stimulated for error stimulations. The error stimulation is specified in connection with the carrier board via CAN bus.
SKU: 85279
| Channels | 1 |
| Input Voltage | 24 VDC |
| Input Current | 4 mA – 20 mA |
| Max. permissible total error | ± 0.1 mA |
| Max. short circuit current | 50 mA |
| Internal resistance in short circuit | max. 3.5 Ω |
| Load resistance | 75 Ω ± 5 Ω |
| Insulation voltage | max. 50 VDC |
| Insulation Resistance | 1 MΩ |
| ADC Resolution | 12 Bit |
| Error stimulation „line breakage“ | via software |
| Error stimulation „Short circuit“ | via software |
| Display of error stimulies | via LED’s |