SET-2310 Line Fault Modul

SET 2310 – Line Fault Module

4 fault channel multiplex 16 differential / 32 single-ended channels

The main function of the plugin SET-2310 Line Fault Daughter Module is to multiplex test signals on the fault buses. On any SET approved SLSC Card with a plugin module slot, the Line Fault Daughter Module can be easily mounted. With 32 single-ended or 16 differential channels, the SET-2310 provides fault connection capabilities in a small form factor. The fault bus of the Daughter Module directs to the base cards connector to connect any fault device. It is possible to connect two fault signals to the two channel fault bus.

Spezifikationen

Absolut Maximum Ratings

	Condition	Value	Comment
Relative Humidity		5% to 95%	Non-condensing
Temperature		0° C to 85° C
Storage		-40° C to 85° C
Max. Input Voltage	Any Pin	60 Vdc
Min. Input Voltage	Any Pin	-60 Vdc
Max. Switching Power	DC, Resistive load	60 W
Max. Current Rating (Channel Relais)		1.5 A
Max. Current Rating (BUS Relais)		8 A

Technical Data

	Condition	Value
Update Time		10 ms
Max Initial Contact Resistance	X1 -> X2	300 mΩ
Expected Electrical Lifetime	1 A, 30 Vdc resistive	Min 105 operations
Expected Electrical Lifetime	1,5 A, 30 Vdc resistive	Min 104 operations

Physical Characteristics

	Value	Comment
Module dimensions	10 mm x 52 mm x 235 mm (H x W x D)	Standard Module size
Connector to Front	2×20 pin female socket terminal strip
Connector to Back	2×20 pin terminal strip

Environmental

	Condition	Value
Operating Humidity	Relative, non-condensing	10% to 90%
Storage Humidity	Relative, non-condensing	5% to 95%
Operating Temperature	Forced-air cooling from chassis	0° C to 40° C
Storage Temperature		-40° C to 85° C
Maximum Altitude		2000 m

SET-2310

Line Fault Module